How to Install Firmware Samsung Smartphone via ODIN [All Types] Complete Step and Link Download

free download ODIN Flasher

How to install the Samsung Smartphone Firmware by ODIN Software [All Types] + Link Download Free ( - Flashing is one of the most used methods by Android technicians or operators to deal with bootloop Android phones, logo hangs or unlock patterns until updating ROM to the latest version.

At Samsung, the flashing process can only be done in ODIN Mode and flashing using ODIN Flasher.


ODIN Flasher is an application used to install Samsung Stock ROM / Firmware and install custom recovery like TWRP.

In this article, we will discuss how to flash the Samsung HP firmware using ODIN Flasher.

in this discussion, we share tips into 3 steps:

  1. Know and Determine the Right Firmware
  2. Select the Suitable Odin Version
  3. Flashing Step.

Check out more ...

1. Get to know and determine the right firmware

Frequent flashing failures are usually caused by:
  • incompatibility between selected ROMs with Samsung type;
  • inappropriate kernel version or model;
  • improper firmware selection;
  • and so forth.
Therefore, carefulness and carefulness is needed in choosing the firmware.
In addition, also pay attention to the advantages and disadvantages. To find out, try reading testimonials from people who have used it because each firmware usually has its own bugs (shortcomings).

Before flashing, first search for Stock ROM that matches your Samsung type. Don't look at the type but see the model number or product name. For example, Samsung Galaxy Tab A (2016) is SM-T285.
To find out the model number, you can look at the model number in Settings (if the HP is still on), on the back of the HP casing or under the battery.

How to Install Firmware Samsung

or just searching on the internet for the name of your Samsung cellphone and find the model number.
you can also see on PRODUCT NAME while in Odin mode as follows ..

The firmware of Samsung consists of 2 types:
  1. One pack »only 1 file with the tar.md5 extension, generally used on older Samsung outputs;
  2. Full pack »consists of several files with the first name AP, CSC, CP, BL also has the extension tar.md5, used on the latest Samsung output;

A description of the full pack file:

  • BL »bootloader file;
  • AP »Android partition, the main operating system file from Samsung;
  • CP »modem firmware file;
  • CSC »Consumer software customization, partitions or additional files for each regional or cellular data.
One Pack firmware example:

How to Install Firmware Samsung Smartphone via ODIN [All Types]

 full pack Firmware example:

 full pack Firmware

If there is, use a full package. But if there is no type or Samsung you have not used the firmware with the fullpack type, so just use the one on the pack.

After getting the suitable firmware, identify the version of Odin that is suitable for your Samsung type.
  • The above version of Odin3_v3.12.4 »generally for the latest Samsung users such as the Galaxy S9, S9 +, Note 8, Galaxy S8, S8 Plus; Whereas the version of 
  • and below »generally for older Samsung users with Lollipop ROM or Marshmallow
If it's one pack, there must be a PDA button or an AP in the Odin version that appears,So look for the version of Odin that has a PDA button.

Actually, you don't have to worry too much about the suitable version of Odin, basically, just try which version works, don't worry if the wrong choice will not cause damage (based on personal experience).

If you already understand, it's time to do flashing!

  • Flashing Step

Requirements needed:

If the cellphone is still on, don't forget to backup important data because it might just delete all data;
Has activated USB Debugging and OEM Unlocking (if the HP can still be on, just ignore it).
Have installed Samsung Android USB Driver;

Materials needed :

  1. PC / Laptop Windows 7 with OS 32 or 64 bit by disabling the driver signature;
  2. Odin Flasher Tools - 52MB;
  3. Samsung firmware / Stock ROM is suitable (can open the website, or just search on Google, I have explained about the firmware above).
  4. If so, run the Odin Flasher Tools application,

If so, turn off the smartphone and enter Odin Mode

Connect Samsung phones that are already in Odin Mode (Download) to a PC or laptop using an original USB cable or good quality.

If detected, COMX will appear in ID: COM and there is a notification Added !! as follows:


For ROM One Pack users;
Click the PDA or AP button,

Install Firmware Samsung Smartphone

then navigate to the firmware one pack file that you downloaded earlier and click Open , to be like this.

How to Install Firmware Samsung Smartphone via ODIN [All Types]

  • Don't check Re-Partition or choose the PIT file unless you change eMMC or use a new eMMC.

if so, click Start.

Wait for the process to take approximately 5-10 minutes, if this works, the Odin display

Install Firmware Samsung Smartphone via ODIN

In a moment the Smartphone will restart automatically, do not remove the USB cable until PASS appears like this :

Install Firmware Samsung Smartphone via ODIN

Wait for a while, Smartphone will enter the main menu (home screen).

Until this stage the flashing process has finished.
You can apply this method to Samsung with the following types / models:

Samsung Galaxy J Series » SM-J100H, SM-J120G, SM-J105F, SM-J110G, SM-J111F, SM-J106B, SM-J200G, SM-G532G, SM-J320G, SM-J500G, SM-J510FN, SM-J700F, SM-G610F, SM-J710FN, SM-J730G;
Samsung Galaxy A Series » SM-A320Y, SM-A300H, SM-A310F, SM-A500F, SM-A520F, SM-A510FD, SM-A710FD, SM-A720F, SM-A910F;
Samsung Galaxy E Series » SM-E500H, SM-E700H;
Samsung Galaxy S Series » SM-G920F, SM-G925F, SM-G9287C, SM-G930FD, SM-G935FD, SM-950FD, SM-955FD;
Samsung Galaxy Note Series » SM-N910H, SM-N9208;
Samsung Galaxy Tab Series » SM-P355, SM-T231, SM-T531, SM-T705, SM-T719Y, SM-T116NU, SM-T285, SM-T365, SM-T715Y, SM-T805, SM-T815Y, SM-T819Y, SM-T585Y, SM-T111.

Problem solving..! 

1. FAIL message appears and error occurs

error message install samsung firmware by odin software
<ID: 0 / 00x> Firmware update start ...
<ID: 0 / 00x> SingleDownload.
<ID: 0 / 00x> aboot.mbn
<ID: 0 / 00x> NAND Write Start !!
<ID: 0 / 00x> FAIL! (Auth)
<ID: 0 / 00x>
<ID: 0 / 00x> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
  1. Replace other ROMs with the latest firmware version;
  2. Change the latest version of Odin.

For Full Pack ROM users;

Click the following button:

  1. The BL button »points to the file with the initial BL_xxx.tar.md5;
  2. AP button »point to the file with the prefix AP_xxx.tar.md5;
  3. CP button »navigate to the file with the CP_xxx.tar.md5 prefix;
  4. CSC button »navigate to the file with the prefix CSC_xxx.tar.md5.
Don't check Re-Partition or choose the PIT file unless you change eMMC or use a new eMMC.

Thank you for reading the article about How to Install Firmware Samsung Smartphone via ODIN [All Types]

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel